There are two ways to enter the management mode. For specific operations, please refer to the product manual that comes with the actual product. (1) Press and hold the “#”, enter the administrator password, and then press the “#” key to enter the management mode.
(2) Press and hold the ” *” key twice , enter the administrator password , and then press the “#” key to enter the management mode .
Blue: When the system wakes up, the door lock indicator turns blue, indicating that you can perform related operationson the door lock . Green: After successfully unlocking Red: When the door is successfully locked, the door lock status indicator turns red, indicating that the door is closed. When the door lock triggers an alarm, the smile indicator also turns red.
Double-click the ” RES ” button (located on the rear panel). You will hear a system prompt: “Factory settings have been restored; password is too simple, please change the administrator password immediately.” (Note: Restoring the lock to factory settings will clear all stored fingerprints, passwords, and card information.)
Overall, this is quite challenging, especially for identical twins. Due to their nearly identical genes, identical twins look very similar, which can lead to potential misidentification of facial recognition, especially at a distance. Furthermore, in the mobile phone industry, facial recognition modules can struggle to distinguish between twins within a range of 0.5 meters. Twins are relatively rare and typically occur within family members, posing a relatively small security threat to users. If security concerns persist, it is recommended to enable two-factor authentication, simultaneously verifying facial features and another unlocking method, such as a fingerprint or passcode.
Two-factor authentication, also known as security mode, can be enabled or disabled in Admin Mode via voice prompts. With two-factor authentication enabled, the door lock requires two registered unlocking methods for access, such as fingerprint + password, password + card, fingerprint + card, password + facial recognition, etc. To activate two-factor authentication, the user must register at least two or more different unlocking methods.
A dummy password, also known as a “peep code,” allows users to add multiple numbers before and after the correct password. The middle digits ensure a continuous and correct password, confusing others and preventing them from verifying the true, correct password.
The information provided below is based on internal testing. Actual battery life may be shorter depending on factors such as product usage frequency and network connection stability. Bluetooth and standalone locks : Approximately 10 months using 4 AA alkaline batteries. WiFi lock : Approximately 6 months using 4 AA alkaline batteries. Facial recognition lock : Approximately 10 months using 8 AA alkaline batteries. Video lock without screen : Approximately 3 months using 1 lithium polymer battery. Video lock with screen : Approximately 2 months using 1 lithium polymer battery.
(1) Wipe the door lock surface regularly with a clean, soft cloth to ensure it remains clean and shiny for a long time. Avoid using water, alcohol, or corrosive chemicals to clean the door lock surface to avoid damage or corrosion.
(2) Do not mix alkaline batteries of different brands or use old and new batteries at the same time. Check the batteries regularly for oxidation. If any oxidation is found, replace them immediately to prevent battery leakage and corrosion of the internal lock structure.
English 
香港中文